1kg 1.75mm | PLA+ Single Color | Navy Grey

Core Technical Parameters:

• Material: PLA
• Net Weight: 1kg per roll
• Density: 1.23g/cm³
• Filament Diameter: 1.75mm
• Diameter Tolerance: ±0.02mm
• Printing Speed: 40~50mm/s
• Printing Temperature: 190~220°C
• Heated Bed Temperature: 0~60°C
• Recommended Layer Height: 0.1~0.2mm
• Elongation at Break: 4.0%
• Flexural Modulus: 3300MPa
• Tensile Strength: 65MPa
• Melt Flow Rate (MFR): 3-7g/10min (190°C, 2.16kg)
• Water Absorption: 0.5%

*Recommended heated bed temperature for lattice platform: 70-80°C